Manual Stream
A configuration with no automation: MAN only streams the console to your PC and turns your keyboard into controller input — like playing from your desk. It works in any game mode.
When to use it
- The first special games of a new save, where automation tends to go wrong (see Basketball27: MC Open Court).
- Automation is stuck on a page you need to click past yourself.
- You want to play a stretch yourself while MAN only handles video and input.
1Switch over and back
- Stop the current configurationIf another configuration is running, press "Stop" first
- Choose "Manual Stream" and press StartThe picture streams as usual; MAN stops automating
- Play yourselfWith the keyboard, or a controller plugged into the PC
- Switch backPress Stop, choose your configuration again and press Start
2Quality, sound and network
Manual Stream and automated runs each keep their own quality, and changes apply on the next connection. Frame rate only applies on PS5. With "Manual Stream" selected you can also change resolution and frame rate right on the configuration card in the main window.
- Manual Stream: on a so-so network start with 720p / 30 FPS and step up once the picture is steady.
- Automated runs: detection and green lock are tuned for 540p / 30 FPS, so keep the defaults in most cases. 720p and 1080p look sharper, but detection has not been validated at those resolutions and may be less accurate; they also need more bandwidth. 60 FPS samples the green window more densely but uses more CPU and bandwidth — slower PCs may drop frames and end up less accurate.
- Weak network mode: turn it on only if the stream often glitches or drops. MAN lowers the bitrate, holds back corrupted frames and resends stick and button input so fewer actions get lost. Not needed on a normal connection.
- Auto-reconnect: if the picture freezes or the console disconnects mid-way, Manual Stream reconnects on its own — the monitor shows "Video interrupted; recovering the connection" — so you don't need to press Stop and Start.
3Manual green lock
Green lock works in Manual Stream too: you bring your player into position, press the shot key, and MAN performs the chosen move and releases on the green window of the shot meter. The settings live in the green-lock group of the monitor's top toolbar (the toolbar folds away after a few idle seconds; move the mouse or press F1 to bring it back):
The ring color must match the indicator under your player in the game; a wrong choice means MAN can't find your player. The purple ring is detected more reliably and isn't confused by pink-purple clothes at the courtside.
- Change the shot key: click the shot-key button, then press the new key; Esc cancels, and you'll be told if the key is already in use. Clicking the Manual shot button does the same as pressing the key.
- Release latency: manual green lock defaults to 205 ms; higher releases earlier. Early → lower it, late → raise it: 10 at a time, 2 once close.
4Default keys
On Xbox it's the keys in the same positions (A / B / X / Y, LB / RB, LT / RT). During Manual Stream a key strip stays at the bottom of the monitor; if you changed keys, what MAN's Key map and that strip show is the reference.
If key presses do nothing, look at the monitor's edge: an amber frame means the window lost focus (or focus is in a text field). Click the monitor picture to capture the keyboard again.
5Change keys
- Stop the run and select Key map → Edit keys in the parameters area.
- Click the binding to change and press the new key; Esc cancels.
- Changes save on this computer right away, apply to the current configuration only and survive configuration updates; Restore defaults undoes them.